Wholesale Tyre Bladder Bicycle Tire Curing Bladder Rubber Rubber Bladder B354/Basic Customization

• Customization: Available
• Applicable Kind: Ordinary Bicycle
• Diameter: Non
• Model NO.: B354
• Tire Design: Non
• Certification: ISO, CE, DOT, RoHS
• Tread Pattern: Gravel Grain
• Type: Tyre Rubber Bladder
• Customized: Non-Customized
• Cord Material: Non
• Color: Black
• Condition: New
• Transport Package: CTN
• Specification: 18*4.0
• Trademark: Vimia
• Origin: Jiangxi, China
• HS Code: 4016950090
• Production Capacity: 1000000PCS/Year

Product Description

Product Description

Tire bladder is one of the important tools for tire production. However, the harsh working conditions require that the bladder must be resistant to high temperature, high pressure, oxidation, and also have good flexibility.
After purchasing bladder, you must pay attention to the following contents in storage and use:
-  Storage conditions
1. If the package is not opened and the bladders are not used for one month, the bladders bundle should be opened so that they can restore with the original state of storage; If the bladders are not used up for half a month after the package is opened, the package rope shall also be untied, so that the bladders can be stored in their original state. Objective to prevent the bladder from aging and cracking;
2. The bladders should be stored at room temperature, away from direct sunlight and heat sources to prevent early aging and cracking of the bladder surface;
3. The bladder storage room must be free of corrosive gas, and must not contact with acid, alkali, oil and oxidizing substances, so as to prevent premature aging of the bladder surface;
4. Bladders should not be stored together with sharp and angular objects to avoid being stabbed or scratched during handling.
- Conditions of Use
1. For the design of bladder clamp, except that the height of bladder clamping edge is compressed by 2~3mm, other dimensions should match the size of bladder clamping edge, and the bladder neck should not be compressed or the height of clamping edge should not be excessively compressed to prevent the bladder neck from cracking;
2. Fixture, mold and equipment parts in contact with the bladder shall be smoothed at the position where the bladder is easy to be injured;
3. When assembling the bladder, it is not allowed to pry or knock with hard objects, nor to roll the assembled bladder on the ground. It should be handled with care;
4. When the B-type vulcanized bladder is closed in the empty mold, the bladder should be filled with a certain pressure medium, and the mold can be closed only after the bladder is expanded;
5. The vulcanizing medium (steam and superheated water) shall not be directly sprayed on the inner side of the bladder. In order to ensure the service life of the bladder, the vulcanizing medium must be strictly deoxidized;
6. It is recommended to park the bladder for 20 days from the date of production, with a validity period of 2 years;
7. When checking the airtightness of the bladder, the expansion of the bladder shall not exceed 1.5 times of the original diameter;
8. When the bladder is used for the first time, after the bladder is heated and expanded, the bladder isolating agent must be evenly coated on the surface. During the use, the brushing times should be appropriately adjusted according to the isolation effect.
9. The bladder shall not contact with acid, alkali, oil and other substances during use, and the isolating agent shall be neutral.

 

 

Our factory view

Jiangxi Vimia Tyre Co., Ltd., founded in May of 2010, is specialized in butyl inner tube researching, designing, manufacturing, testing and marketing for a wide variety of bicycles, battery-driven cycles, and light-duty motorcycles as well. On compound of 35, 000m, Vimia owns spacious buildings, complete facilities and well-trained staff that guarantee the capacity of annual over 20 million pieces. As located in Jiangxi, adjacent to Yangtze River Delta, Vimia undoubtedly benefits to a large extent from convenience of transportation for not only timely domestic delivery but prompt overseas shipment.

Since establishment, we have been devoting ourselves to supplying MID-to-high products and quality services rather than that of low cost, average quality, insomuch as we firmly believe that only in this way can we survive and develop in a long run. Also bearing such understanding in mind, joining with the 4P and 5W1H concepts, we have been continuously improving our management in order to satisfy various demands from different customers. Therefore, it goes without saying that it is a must to meet requirements of ISO9001: 2008, ISO14000, and other professional standards, on which are what we are striving to work.

In addition, Vimia also emphasize and reinforce the connections and relations with clients, in consistent and close communications, mutual exchange of needed commodity and information, by which help us keep abreast with the state-of-the-art technologies and trends to better our products and services. With the steady increase of both output and quality, we are convinced that through sincere cooperation, both our clients and we shall acquire the benefits of mutual growth and reach the win-win situation in perspective of development. Needless to say, it is exactly what we are anticipating and persuing.

Our factory offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.

 

 

Production workshop

 

Certifications

 

Our International Exhibition

Packaging & Shipping

 

FAQ

Q1. Can I get some samples?

A1: Sample order is welcome here. Mixed samples are acceptable. We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q2.  How does our factory carry out quality control?

A2: Our QC always attach great importance to quality control from the very beginning to the end of the production.Each product will be carefully tested before packed.

Q3.  Can I mix different products in one container?

A3: Yes,any products can be matched.

Q4. What payment do you accept?

A4: In general, our payment is 30%T/T deposit and 70%T/T after seeing the copy of B/L,That can be discussed.

Q5. Do you accept OEM or ODM orders?

A5: Yes, Our R&D team will offer one stop service for you from original idea to finished product.

Q6. Do you test all your goods before delivery?

A6:Of course, We have strict quality control system and check every product carefully to ensure there aren't any quality problems.
 
Q7. What is your MOQ?

A7. Low MOQ, 1 pc for sample checking quality is available.
 
Q8. What is your delivery way?

A8. Fedex,UPS,EMS,Our own logistics or designated logistic company by you.
 
Q9. What is your assurance?

A9. Checking carefully before delivery, strong Carton Packed, marking on each box, tracking infos updated on time.
 
Q10. How about your delivery time?

A10: Generally, the delivery time is about 7-30 days. It's according to your order quantity.
 
Q11: How do you make our business long-term and good relationship?

A11:

1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.